Utilizes
molding technology with a multi-composite combination featuring a 3K
high-density carbon outer layer, a uni-directional carbon composite
layer, an aramid fiber layer, and a fiberglass one
3K high density carbon outer layer provides strength and efficiency of energy dissipation over the shell
Layered
composite combination created by bonding everything together with an
epoxy resin already applied on the pre-preg fiber, perfectly controls
the ideal proportion of resin versus fiber to maximize strength,
mechanical performance, and lightweight— providing improved energy
management, as well as limited outer shell deflection, making the energy
spread wider and better absorbed by the EPS liner
Inner Shell
Four
inner shells— construction is optimized to ensure riders have the
correct fit, which not only improves comfort and reduces overall weight,
but most importantly, improves the effectiveness of the helmet in an
impact
Eight-piece
multi-density EPS liner with six specific densities that are
strategically positioned in different zones to ensure excellent energy
absorption from impact forces dissipated over the outer shell, as well
as a close and comfortable fit
Linear
and oblique force management — The EPS inner surface is smooth,
creating an optimized, low friction area, for superior oblique impact
management
To
help fight and mitigate rotational, oblique, and linear impact forces,
the inner surface of the EPS liner was designed with a low friction
surface— polished to be smooth and specially coated to reduce friction
even further, allowing the comfort liner to move against the EPS thus
allowing the rider's head to move independently inside of the helmet, or
vice-versa, which can significantly reduce the amount of force
transmitted to the head, neck, brain, and spine from an oblique impact,
while simultaneously reducing the possibility of a concussion
A-Head
Fitment System — Allows the helmet to be tuned exactly to the rider's
preference by having the ability to adjust both the height and angle at
which the helmet sits on the head
The
EPS is fitted with the A-Head Fitment System that allows for a specific
setup that can be adapted to how deep the rider's head sits in the
helmet, as well as how far forward or backward the helmet is tilted
Aerodynamics
Developed
with CFD simulations, validated in the wind tunnel and on the track,
the Supertech R10 helmet is optimized for low drag performance and
aerodynamic stability
Comes
with two separate aerodynamic spoilers —a standard and a longer, race
version— and they're both fitted with elastic joints that help the
spoiler detach from the helmet shell if it is subjected to a significant
impact, no matter the angle, to reduce potential rotational energy
Lateral winglets to further support the Supertech R10's stability and improve aerodynamic drag
Visor has turbulators to improve aero-acoustic performance
Ventilation
Contains
11 ventilation points, not including the eye port, with 7 intakes
including 3 in the chin guard and 4 on the top of the helmet, plus 4
exhausts, with 2 lateral ports on the chin bar, and 2 on the top rear of
the helmet
Ventilation ports integrate directly with the helmet's shell with a series of air ducts through the inner EPS liner
Airflow
comes in through the ports, as well as actively circulates over and
around the rider's head through a series of channels and then gets
extracted out the back of the helmet
Top
vent features a large central slider which channels air down to the top
of the head for better comfort, which, when open, has vents for hot air
extraction from the rider's forehead
Under the rear spoiler there are two extractor vents for effective hot air exhausting
Chin
vents are formed by two openings located at the front of the helmet at
the sides of the shield lock mechanism, where each flap has a tab in the
corner, which is used to open or close the vent— Air entering from this
point is channeled towards the inner side of the shields, creating a
laminated flow of air that effectively prevents fogging and misting
Chin bar vents are used to extract humid air to the outside of the helmet
Shield Features
Shield
mechanism fitted with metal lock components to prevent unwanted shield
detachment during impacts, locked in the closed position by a front
metal lock
The
visor has two features including a metal locking mechanism lever to
prevent unwanted shield detachment during impacts and/or crashes, plus a
lowered side line for a maximized field of view, coming on top of an
already wide eye port providing 220° of lateral and 57° of vertical
visibility for great riding comfort
Visor can be easily changed or removed thanks to its secure and tool-less quick-release system
Fitted
with an Optical Class 1 shield, 3 mm in thickness, and coated with an
anti-scratch and anti-fog treatment— shield equipped with internal pins
to accommodate Pinlock® lens and tear-offs
Removable Lining
Linings are removable and washable, and feature fabrics with anti-microbial treatments
Crown
pad and neck pad are elastically connected with a construction based on
four panels (front, sides, and rear), for an optimized fit with the
proper foam thickness
Cheek
pads fitted with foam and fabrics, offering comfort and breathability—
cheek pads also feature an emergency extraction system, allowing the
side cheek padding to be easily removed by trackside support and medical
staff, and they also have a channel for the installation of a hydration
system
Chin Bar Profile
Base area sculpted to give a relief section— the bottom profile is raised to clear the collarbone
Shipping weight: 0.01 lbs
UPC Code: 8059347376103
Made in CN
Sold as: EA
